|
(1) WA Whitney 3400/60
RTC CNC Punch Plasma Fabricating Center
 
|
| 60" x 120"
Without Repositioning |
| 1000 Lb. Unit Part Weight |
| Punching Capacity
1/2" Dia. Hole in 1/2" MS Plate, 5" Dia. Hole in 11 Gage |
| 9 Station Tool Changer |
| Hypertherm HT-2000 Plasma
Torch - 3/4" Thickness Capacity |
|
(1) WA Whitney 647C
CNC Panel-Master
 |
Description
 | "The "Panelmaster"
was designed to provide automatic high speed production when punching holes in flat sheet
material. The machine's many outstanding features contribute to its versatility of
operations, thus permitting it to be used to pierce, punch, notch, nibble or louvre.
Highest quality runs are assured without layouts or templates and accurate re-runs are
made with a minimum of set-up time. Hydraulic power enables the press to maintain
full tonnage capacity throughout the punching stroke. Hydraulic power also
eliminates "Impact Shock", as incurred on a mechanical press, resulting in
greatly increased tool life. The use of W. A. Whitney standard 28XX Style Punches
and Dies with Quick Change Tooling provides fast pre-aligned tool changes." (W.
A. Whitney, 1979)
|
| The versatility of the Control
System permits the press to be operated on Single Cycle, Automatic and Manual settings. |
|
| 500 Lb. Unit Part Weight |
| Punching Capacity 1/2" Dia. Hole
in 1/2" MS Plate, 5" Dia. Hole in 11 Gage |
| Max 200 Plasma Torch -
3/4" Thickness Capacity |
|
|
Minerva Welding & Fabricating, Inc.
